TK TW45C Скачать руководство пользователя страница 61

Страница: 61 / 148

Transportation and storage
Intermediate storage

TK Elevator

BA, TW45C | 6231003860 | 06/2022

2. Compare with the ordering and delivery documents.

3. Check the packaging for damage and any other conspicuous anomalies.

In the case of damage

1. Do not commission a damaged product.

2. Any damage that is determined is to be documented immediately by

means of a sketch, photo or description of the damage.

3. Report damage to the manufacturer.

5.6

Intermediate storage

▪

The product may be exposed to a maximum relative air humidity of 60%
(at 20 °C).

▪

Store the product carefully in a protected location:

– Protect it against the formation of condensation and moisture.

– Protect against dirt in the machine.

In the case of downtimes of longer than 1 year, carry out standstill main-
tenance

Chap. 9.1

Содержание TW45C





















































































































































Результаты поиска

Содержание TW45C

Отзывы:

Похожие инструкции для TW45C

Бренды по названию

Популярные бренды

TK TW45C, Руководство по эксплуатации

Результаты поиска

Содержание TW45C

Отзывы:

Похожие инструкции для TW45C

Бренды по названию

Популярные бренды