Titan TTT831HDC Скачать руководство пользователя страница 15

Страница: 15 / 56

TTT831HDC-Li

by TITAN

Getting

started...

WA R N I N G !

T h i s p r o d u c t p r o d u c e s a n

electromagnetic field during operation! This

fieldmay under some circumstances interfere with

active or passive medical implants! To reduce

the risk of serious or fatal injury, we recommend

persons with medical implants to consult their

doctor and the medical implant manufacturer

before operating this product!

Emergency

Familiarise yourself with the use of this product

by means of this instruction manual. Memorise the

safety directions and follow them to the letter. This

will help to prevent risks and hazards.

Always be alert when using this product, so that you

can recognise and handle risks early.

Fast intervention

can prevent serious injury and damage to property.

Switch the product off and remove the battery

pack if there are malfunctions.

Have the product

checked by a qualified professional and repaired, if

necessary, before you operate it again.

Residual risks

Even if you are operating this product in accordance

with all the safety requirements, potential risks of injury

and damage remain. The following dangers can arise in

connection with the structure and design of this product:

1. Health defects resulting from vibration emission if the

product is being used over long periods of time or not

adequately managed and properly maintained.

2. Injuries and damage to property due to broken

attachments or the sudden impact of hidden objects

during use.

3. Danger of injury and property damage caused by flying

objects.

Safety information

Содержание TTT831HDC

























































Результаты поиска

Содержание TTT831HDC

Отзывы:

Похожие инструкции для TTT831HDC

Бренды по названию

Популярные бренды

Titan TTT831HDC, Инструкция по эксплуатации

Результаты поиска

Содержание TTT831HDC

Отзывы:

Похожие инструкции для TTT831HDC

Бренды по названию

Популярные бренды