Titan TTT831HDC Скачать руководство пользователя

Страница: 3 / 56

TTT831HDC-Li

by TITAN

Getting

started...

Safety information

Safety warnings

Keep work area clean and well lit.

Cluttered or dark

areas invite accidents.

Do not operate power tools in explosive

atmospheres, such as in the presence of flammable

liquids, gases or dust.

Power tools create sparks

which may ignite the dust or fumes.

Keep children and bystanders away while operating

a power tool.

Distractions can cause you to lose control.

Electrical safety

Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools.

Unmodified plugs and matching outlets will

reduce risk of electric shock.

Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators.

There is an increased risk of electric

shock if your body is earthed or grounded.

General power tool safety warnings

Work area safety

WARNING!

Read all safety warnings,

instructions, illustrations and specifications

provided with this power tool.

Failure to follow

all instructions listed below may result in electric

shock, fire and/or serious injury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers

to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

Содержание TTT831HDC

























































Результаты поиска

Содержание TTT831HDC

Отзывы:

Похожие инструкции для TTT831HDC

Бренды по названию

Популярные бренды

Titan TTT831HDC, Инструкция по эксплуатации

Результаты поиска

Содержание TTT831HDC

Отзывы:

Похожие инструкции для TTT831HDC

Бренды по названию

Популярные бренды