Titan TTT831HDC Скачать руководство пользователя

Страница: 7 / 56

TTT831HDC-Li

by TITAN

Getting

started...

When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause burns

or a fire.

Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid

ejected from the battery may cause irritation or burns.

Do not use battery pack or tool that is damaged or

modified.

Damaged or modified batteries may exhibit

unpredictable behaviour resulting in fire, explosion or risk

of injury.

Do not expose a battery pack or tool to fire or

excessive temperature.

Exposure to fire or temperature

above 130 °C may cause explosion.

Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specified in the instructions.

Charging

improperly or at temperatures outside the specified

range may damage the battery and increase the risk of

fire.

Service

Have your power tools serviced by a qualified repair

person using only identical replacement parts.

This

will ensure that safety of the power tool is maintained.

Never service damaged battery packs.

Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

Safety information

Содержание TTT831HDC

























































Результаты поиска

Содержание TTT831HDC

Отзывы:

Похожие инструкции для TTT831HDC

Бренды по названию

Популярные бренды

Titan TTT831HDC, Инструкция по эксплуатации

Результаты поиска

Содержание TTT831HDC

Отзывы:

Похожие инструкции для TTT831HDC

Бренды по названию

Популярные бренды