Titan TTT831HDC Скачать руководство пользователя страница 10

Страница: 10 / 56

TTT831HDC-Li

by TITAN

Getting

started...

wire may make exposed metal parts of the product "live"

and could give the operator an electric shock.

Keep cable away from cutting area.

During operation

the cable may be hidden in shrubs and can be

accidentally cut by the blade.

Keep all parts of the body away from the saw chain

when the product is operating. Before you start the

product, make sure the saw chain is not contacting

anything.

A moment of inattention while operating

products may cause entanglement of your clothing or

body with the saw chain.

Always hold the product with both hands on the

handle and soft grip.

Holding the product with only one

hand or on parts not intended for that increases the risk

of personal injury and should never be done.

Wear safety glasses and hearing protection. Further

protective equipment for head, hands, legs and

feet is recommended.

Adequate protective clothing

will reduce personal injury by flying debris or accidental

contact with the saw chain.

Do not operate a product in a tree.

Operation of a

product while up in a tree may result in personal injury.

Always keep proper footing and operate the product

only when standing on fixed, secure and level

surface.

Slippery or unstable surfaces such as ladders

may cause a loss of balance or control of the product.

10.

When cutting a limb that is under tension be alert

for spring back.

When the tension in the wood fibres is

released the spring loaded limb may strike the operator

and/or throw the product out of control.

11.

Use extreme caution when cutting brush and

saplings.

The slender material may catch the saw chain

and be whipped toward you or pull you off balance.

Safety warnings

Safety information

Содержание TTT831HDC

























































Результаты поиска

Содержание TTT831HDC

Отзывы:

Похожие инструкции для TTT831HDC

Бренды по названию

Популярные бренды

Titan TTT831HDC, Инструкция по эксплуатации

Результаты поиска

Содержание TTT831HDC

Отзывы:

Похожие инструкции для TTT831HDC

Бренды по названию

Популярные бренды