14
SECTIONS
Horizontal Unit
Before beginning:
Be sure to check the tightness of all bolts,
nuts and setscrews, which could have loosened
during shipping.
Rotate blower fan shaft(s) by hand to make
certain there is no interference or rubbing
between components.
Verify installation surface is level before
proceeding with unit installation.
Locate mounting hardware:
Items included: Caulk, Caulk Tape,
Fasteners
Check all sections, of the unit, thoroughly for
assembly hardware. The assembly hardware
will be found packaged in either a clear plastic
bag or corrugated box.
NOTICE: There may be more than one
package of assembly materials
provided.
1. Apply provided caulk tape to the face of
the joint to be bolted together, on one side only
as shown below, before assembly. Ensure
there are no gaps in the caulk tape when
applying.
Do not
cover bolt holes with caulk
tape.
2. Locate and match each section letter on
the service side of the unit with the
corresponding letter on the other section. In
addition, also refer to the unit submittal drawing
for proper assembly order.
3. Pull sections together at the lifting lugs
using, two, half inch rods w/ nuts and large
washers as shown below.
Caulk Tape
Caulk
Tape
