TIMYO kreutzer E-pack, Руководство пользователя

Страница: 3 / 72

© TIMYO B.V. TIMYO USER MANUAL EN SKO52021V2 PAGE 3
MANUAL VANDIJCK E-BIKES VD0.1
5.4.4 Settings 39
5.4.5 Error messages 41
5.5 Overview of display functions C600 41
5.5.1 Displaying speeds 41
5.5.2 Setting up walk assist 41
5.5.3 Using the lighting 42
5.5.4 Battery power (Fig. 1) 42
5.5.5 Distance indicator (Fig. 2) 42
5.5.7 Error messages 42
5.6 Overview of display screen C300T 43
5.6.1 Switching on 44
5.6.2 Display lay-out 44
5.6.3 Battery power on display 44
5.6.4 Settings 44
5.6.5 Error messages 46
5.6.6 Throttle 46
5.6.7 About the throttle 46
5.7 Overview of display functions DP C07 47
5.7.1 Overview of control panel 48
5.7.2 On / Off button 48
5.7.3 Selection of assist level 48
5.7.4 Switch between Distance Mode and Speed Mode 49
5.7.5 Switching the bicycle lighting and display lighting on and off 49
5.7.6 Walk assist 49
5.7.7 Switching between engine assist and pedal assist 50
5.7.8 Charging status indicator 50
5.7.9 Settings 50
5.7.10 Resetting the data of a single trip 51
5.7.11 Distance displayed in kilometres/miles 51
5.7.12 Bicycle lighting sensor, setting the light sensitivity 51
5.7.13 Screen brightness lighting 52
5.7.14 Automatic switch-off 52
5.7.15 Error messages 52
5.8 Overview of display screen KD716 54
5.8.1 Switching the system on/off 54
5.8.2 Switching walk assist on/off 55
5.8.3 Switching backlight on/off 55
5.8.4 Engine assist level 55
5.8.7 Battery capacity 55
5.8.8 Error code indication 55
5.8.9 Error code list 56
5.8.10 General Settings 56
5.8.12 Trip Distance Clearance 56
5.8.13 Backlight settings 56
5.8.14 Unit settings KM/Miles 56
5.8.15 General parameter settings 56
5.8.16 Wheel diameter settings 57
5.8.17 Speed limit settings 57
5.8.18 Personalized parameter settings 57
5.8.19 Battery capacity meter settings 57
5.8.20 Power Assist level settings (optional) 58
5.8.21 PAS ratio settings 58
5.8.22 Controller overcurrent settings (optional) 58
5.8.23 PAS sensor settings (optional) 58
5.8.24 PAS sensitivity settings 58
5.8.25 Magnet Quantity Settings 59
5.8.26 Speed sensor settings (optional) 59
5.8.27 Gear functions (optional) 59
5.8.28 Gear level on/off 59
5.8.29 Battery power delay settings 59
5.8.30 Maximum speed limit settings 59
5.8.31 Enable/disable settings 60
5.8.32 Push button enable/disable 60
5.8.33 Enable password settings 60
5.8.34 Enable/disable password 60
5.8.35 Change power-on password 60
5.8.36 Close the settings 60
5.8.37 Restore default settings
61
6 Battery 62
6.1 Rear rack battery KE280/HH280 62
6.1.1 Operating the battery lock - rear rack 62
6.1.2 Removing the battery from the e-bike - rear rack 61
6.1.3 Installing the battery in the e-bike - rear rack 62
6.1.4 Charging - rear rack 62
6.1.5 Charging status and capacity 62
6.1.6 Sleep mode 62
6.2 Semi-integrated battery Saber/Swordfish 63
6.2.1 Operating the battery lock - Semi-integrated 63
6.2.2 Removing the battery from the e-bike - Semi-integrated 63
6.2.3 Installing the battery in the e-bike - Semi-integrated 63
6.2.4 Battery charging - Semi integrated 63
6.3 Fully integrated battery TM40/TM50/TM70 64
6.3.1 Battery lock operation - fully integrated 64
6.3.2 Removing the battery from the e-bike - fully integrated 64
6.3.3 Inserting the battery into the e-bike - fully integrated 64
6.3.4 Battery charging - fully integrated 64