© TIMYO B.V.
TIMYO USER MANUAL EN SKO52021V2
PAGE 27
MANUAL
VANDIJCK
E-BIKES
VD0.1
Number
Definition
Solution
07
Overcurrent protection.
1. Remove the battery.
2. Replace the battery.
3. Contact your dealer if the
problem persists.
08
Error with the Hall sensor signal in the
engine.
Contact your dealer.
09
Error with the engine phases
Contact your dealer.
10
The temperature in the engine has reached
its maximum protection value.
1. Turn the system off and leave the e-bike
cool down.
2. Contact your dealer if the
problem persists.
11
The temperature sensor in the engine
has an error
Contact your dealer.
12
Error with the current sensor in the
controller.
Contact your dealer.
13
Error with the temperature sensor in
the battery.
Contact your dealer.
14
The protection temperature in the
controller has reached its maximum
protection value.
1. Turn the system off and leave the e-bike
cool down.
2. Contact your dealer if the
problem persists.
15
Error with the temperature sensor in the
controller.
Contact your dealer.
21
Speed sensor error.
1. Reboot the system
2. Check that the magnet is on the spoke is
aligned with the speed sensor and that the
distance is between 10 mm and 20 mm.
3. Check that the connector of the
speed sensor is correctly connected.
4. Contact your dealer if the
problem persists.
25
Torque signal error.
1. Check that all connections are correctly
connected.
2. Contact your dealer if the
problem persists.
26
Speed signal from torque sensor has an
error.
1. Check the speed sensor connector
to check that it is connected correctly.
2. Check the sensor for signs of damage.
3. Contact your dealer if the
problem persists.
27
Overcurrent, electric power, from controller.
Contact your dealer.
30
Communication problem.
1. Check that all connections are correctly
connected.
2. Contact your dealer if the
problem persists.
33
Braking signal has an error.
(If brake sensors are fitted)
1. Check all connectors.
2. Contact your dealer if the
problem persists.
