© TIMYO B.V.
TIMYO USER MANUAL EN SKO52021V2
PAGE 53
MANUAL
VANDIJCK
E-BIKES
VD0.1
Contact a technician to correct the error message. The display will not return to normal until the
problem is resolved. The drive will not be functional until then.
Error code 10 will probably appear on the display if the e-bike climbs for a long time at a
time. This indicates that the engine temperature has reached the protection value. In this
case, the user should stop and pause the e-bike. If the user allows the e-bike to continue to
run, the engine will automatically terminate the power supply.
Incorrect operation of the drive system and changes made to the battery, charger or drive
system can result in injury or costly damage. In such a case, the manufacturer cannot
accept liability for any damage or losses that may have been incurred. Changes to
the electrical system may result in criminal prosecution. This may be the case if the
supported maximum speed has been modified.
Number
Definition
Solution
12
Error with the current sensor in the drive
Take your electric e-bike to your dealer or a speci-
alist to have the error repaired
13
Error with the temperature sensor in the
battery
Take your electric e-bike to your dealer or a
specialist to have the error fixed
21
Error with the sensor that detects the speed
of the wheels
Take your electric e-bike to your dealer or to a
specialist to have the error resolved.
22
BMS communication error
Take your electric e-bike to your dealer or to
a specialist to fix the error.
25
Torsion sensor torsion signaling error
Take your electric e-bike to your dealer or to a
specialist to have the error resolved.
26
Torque sensor speed signaling error
Take your electric e-bike to your dealer or to
a specialist to fix the error.
30
Communication error
Take your electric e-bike to your dealer or to a
specialist to have the error resolved.
!
!
