© TIMYO B.V.
TIMYO USER MANUAL EN SKO52021V2
PAGE 56
5.8.9 Error code list
5.8.10 General Settings KD716
Press the ' ' button to turn on the display. In case of a parked e-bike with the display activated,
press and hold ' ' and ' ' simultaneously for more than 2 seconds to enter general settings.
DO NOT change the settings while riding the e-bike!
All settings should be made while the e-bike is parked!
5.8.12 Trip Distance Clearance
'TC'
(trip clearance) stands for the setting for clearing the travel distance. If you
want to delete the trip distance, press button ' ' or ' ' to select yes or no. 'Yes'
represents clearing a single trip distance. 'No' stands for not clearing a single trip
distance. To save a changed setting, press the ' ' button and access backlight
settings.
5.8.13 Backlight settings
'bL'
stands for backlight settings. Level '1' is the lowest brightness. Level '2' is the
average brightness. Level '3' is the highest brightness. The default value is '1'. To
change the backlight brightness, press the ' ' or ' ' button to increase or
decrease until the desired brightness level is displayed.
Press ' ' to save a changed setting and then access the conversion settings of the
device.
5.8.14 Unit settings KM/Miles
“U”
stands for unit settings, '1' is miles and '2' is kilometers. The default value is '2'.
To change the unit, press the ' ' or ' ' button to increase or decrease until
the desired unit is displayed. Press ' ' to save a changed setting and return to the trip distance
clearing settings. Press ' ' for 2s and close general settings
5.8.15 General parameter settings
KD716
To access the general parameter settings interface, press and hold both the ' ' and ' ' buttons
simultaneously for 2s to enter general settings. Press and hold both the ' ' and ' ' buttons for 2s
to enter general parameter settings.
Number
Definition
21
Current deviation
22
Acceleration deviations
23
Deviation from the engine phase
24
Engine Hall Signal Anomaly
25
Brake deviation
30
Communication deviation
!
