© TIMYO B.V.
TIMYO USER MANUAL EN SKO52021V2
PAGE 26
5.2.25 Sensor software information
PLEASE NOTE:
All data under this item cannot be changed and can only be
viewed.
When the system is switched on, short-press twice to open the 'MENU'.
Press repeatedly until 'SSc (Sensor Software check)' appears in the display
(as shown here). Once you have viewed the information you require, short-press
twice to save your choice and return to the main screen, or short-press
once to go to the next item 'Battery Information'.
PLEASE NOTE:
This information will not be displayed if no torque sensor is present
in the drive system.
5.2.26 Error codes
PLEASE NOTE:
All data under this item cannot be changed and can only be viewed.
When the system is switched on, short-press twice to open the 'MENU'. Press
repeatedly until 'E00' appears on the display (as shown below). You can
short-press to view the last ten error codes 'EO0' to 'EO9'. The error code '00'
indicates that there is no error. Once you have checked all the information you
want, short-press twice to return to the main screen.
5.2.27 Battery information
This function is disabled, this menu does not display any relevant or appropriate
information.
5.2.28 Error code definitions
The display can show the errors of an e-bike. If an error is detected, the
wrench icon appears on the display and one of the following
error codes is displayed.
Note
: read the description of the error code carefully. If you see the error code,
first restart the system. If the problem is not resolved, contact your dealer.
!
!
i
Number
Definition
Solution
04
The power supply throttle does not return to
the correct position.
Check that the throttle throttle is back in the correct
position. If the situation does not improve,
install a new throttle. (only if this function is available)
05
Power supply error
Check the plug or cable of the
throttle whether they are properly attached
2. Disconnect the throttle. If the problem
still occurs, please contact your
dealer (only if this function is available)
