Timewave PK-232 MBX Скачать руководство пользователя страница 231

Страница: 231 / 266

_______________________________________________________________________________

TMail ON|OFF Default: OFF

Mode: AMTOR Host: TL

_________________________________ Parameters: _________________________________

ON - The PK-232MBX operates as a personal AMTOR BBS or MailDrop.

OFF - The PK-232MBX only operates as a normal CCIR 476 or 625 controller.

_______________________________________________________________________________

The PK-232's MailDrop is a personal mailbox that uses a subset of the

W0RLI/WA7MBL PBBS commands and is similar to operation of APLINK stations. When

TMAIL is ON and another station establishes an ARQ link with your MYSELCAL or

MYIDENT, the remote AMTOR station may leave messages for you or read messages

from you. Third-party messages are not accepted by your AMTOR MailDrop unless

3RDPARTY is ON.

See the MDCHECK, TMPROMPT, MDMON, MTEXT, MMSG MYSELCAL and MYIDENT commands.

_______________________________________________________________________________

TMPrompt text Default: (see text)

Mode: AMTOR/MailDrop Host: Tp

_________________________________ Parameters: _________________________________

text - Any combination of characters and spaces up to a maximum of 80 bytes.

_______________________________________________________________________________

TMPROMPT is the command line sent to a calling station by your AMTOR MailDrop in

response to a Send message command. The default text is:

"GA subj/GA msg, '/EX' to end."

Text before the first slash is sent to the user as the subject prompt; text

after the slash is sent as the message text prompt. If there is no slash in the

text, the subject prompt is "SUBJECT:" and the text prompt is from TMPROMPT.

_______________________________________________________________________________

TRACe ON|OFF Default: OFF

Mode: Packet/FAX/Baudot/AMTOR Host: TR

_________________________________ Parameters: _________________________________

ON - Trace function is activated.

OFF - Trace function is disabled.

_______________________________________________________________________________

8/91 A-72

Содержание PK-232 MBX











































































































































































































































































Результаты поиска

Содержание PK-232 MBX

Отзывы:

Timewave PK-232 MBX, Руководство по эксплуатации, Страница: 231 / 266

Результаты поиска

Содержание PK-232 MBX

Отзывы: