Timewave PK-232 MBX Скачать руководство пользователя страница 201

Страница: 201 / 266

_______________________________________________________________________________

MProto ON|OFF Default: OFF

Mode: Packet Host: MQ

_________________________________ Parameters: _________________________________

ON - Monitors all I and UI frames as before.

OFF - Monitors only those I and UI frames with a PID byte of $F0.

_______________________________________________________________________________

This is in response to NET/ROM, which sends frames that have a PID of $CF, and

that contain Control characters. If you want to monitor every frame including

those used by NET/ROM, you must turn MPROTO ON.

_______________________________________________________________________________

MRpt ON|OFF Default: ON

Mode: Packet Host: MR

_________________________________ Parameters: _________________________________

ON - Show digipeater path in the packet header.

OFF - Show only originating and destination stations in the packet header.

_______________________________________________________________________________

MRPT affects the way monitored packets are displayed. When MRPT is ON

(default), the call signs of all stations in the digipeat path are displayed.

Call signs of stations heard directly are flagged with an asterisk (*) as shown:

W2JUP-4*>WA1IXU>W1AW-5>W1AW-4 <I;0,3>:

When MRPT is OFF, only the originating station and the destination stations are

displayed are displayed in the monitored packet header as shown below:

W2JUP-4*>W1AW-4 <I;0,3>:

_______________________________________________________________________________

MSPeed "n" Default: 20 WPM

Mode: Morse Host: MP

_________________________________ Parameters: _________________________________

"n" - 5 to 99 signifies your PK-232's Morse transmit speed.

_______________________________________________________________________________

The MSPEED command sets the Morse code keying (transmit) speed for your PK-232.

The slowest available Morse code speed is 5 words per minute. When using Morse

speeds between 5 and 14 WPM, the transmitted code is sent with Farnsworth

spacing at a character speed of 15 words per minute. The spacing between

characters is lengthened to produce an overall code rate of 5 to 14 WPM.

_______________________________________________________________________________

MStamp ON|OFF Default: OFF

Mode: Packet Host: MS

_________________________________ Parameters: _________________________________

ON - Monitored frames ARE time stamped.

OFF - Monitored frames ARE NOT time stamped.

_______________________________________________________________________________

8/91 A-54

Содержание PK-232 MBX











































































































































































































































































Результаты поиска

Содержание PK-232 MBX

Отзывы:

Timewave PK-232 MBX, Руководство по эксплуатации, Страница: 201 / 266

Результаты поиска

Содержание PK-232 MBX

Отзывы: