Tibbo DS10x0 Скачать руководство пользователя

Страница: 109 / 570

Embedded Modules

© Tibbo Technology Inc.

- baudrates of up to 115'200bps;

- none/even/odd/mark/space parity modes;

- 7/8 bits/character modes;

- full-duplex mode with optional flow control, half-duplex mode with
automatic direction control.

128KBytes of flash memory. First 64KB are used to store device firmware (TiOS).
The rest is available to your Tibbo BASIC/C application.

2KBytes of EEPROM memory.

9 general-purpose I/O lines.

The following lines are additionally available:

- 2 lines for green and red status LED control;

- 2 lines for Ethernet status LED control;

- 1 line to connect the "system" button.

- External reset input.

Device firmware can be upgraded through the serial port or Ethernet.

Tibbo BASIC/C application can be uploaded and debugged through the Ethernet.

Programming features

The following data types and related functions are supported:

- Byte and char (occupy 1 byte);

- Integer (word) and short (occupy 2 bytes);

- String, can be up to 255 characters long;

The following function groups are supported:

- Conversion to and from strings: asc, chr, val, str, left, mid, right, len, instr,
etc. (16 function in total);

The following objects form the EM200 platform:

- Sockets (sock.) object -- supports up to 16 simultaneous UDP or TCP
connections, or HTTP sessions;

- Ethernet (net.) object -- controls Ethernet interface;

- Serial (ser.) object -- supports UART, Wiegand, and clock/data modes;

- Input/output (io.) object -- handles I/O lines;

- EEPROM (stor.) object -- facilitates access to the EEPROM memory;

- ROM data (romfile.) object -- provides access to the fixed ("ROM") data of
your Tibbo BASIC/C application;

- LED pattern (pat.) object -- "plays" patterns on Green and Red Status LEDs;

- System button (btn.) object -- handles special system (MD) button;

- System (sys.) object -- controls general device functionality.

Содержание DS10x0



























































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DS10x0

Отзывы:

Похожие инструкции для DS10x0

Бренды по названию

Популярные бренды

Tibbo DS10x0, Руководство по программируемому оборудованию

Результаты поиска

Содержание DS10x0

Отзывы:

Похожие инструкции для DS10x0

Бренды по названию

Популярные бренды