THORLABS 4000 Series Скачать руководство пользователя страница 93

Страница: 93 / 97

5 Appendix

5.2 Copyright and Exclusion of Reliability

Thorlabs GmbH

has taken every possible care in preparing this Operation Manual. We however

assume no liability for the content, completeness or quality of the information contained therein.

The content of this manual is regularly updated and adapted to reflect the current status of the

software. We furthermore do not guarantee that this product will function without errors, even if

the stated specifications are adhered to.
Under no circumstances can we guarantee that a particular objective can be achieved with the

purchase of this product.
Insofar as permitted under statutory regulations, we assume no liability for direct damage,

indirect damage or damages suffered by third parties resulting from the purchase of this

product. In no event shall any liability exceed the purchase price of the product.
Please note that the content of this User Manual is neither part of any previous or existing

agreement, promise, representation or legal relationship, nor an alteration or amendment

thereof. All obligations of

Thorlabs GmbH

result from the respective contract of sale, which also

includes the complete and exclusively applicable warranty regulations. These contractual

warranty regulations are neither extended nor limited by the information contained in this User

Manual. Should you require further information on this product, or encounter specific problems

that are not discussed in sufficient detail in the User Manual, please contact your local

Thorlabs

GmbH

dealer or system installer.

language, either as a whole or in parts, without the prior written permission of

Thorlabs GmbH.

Содержание 4000 Series

































































































Результаты поиска

Содержание 4000 Series

Отзывы:

THORLABS 4000 Series, Руководство программиста, Страница: 93 / 97

Результаты поиска

Содержание 4000 Series

Отзывы: