QUICkgUIDEToUsIngYoURRECEIvER
P9
English
5.0QUICkgUIDEToUsIngYoURRECEIvER
We at THOMSON understand that you can’t wait to enjoy your new HD receiver. The following
quick guide will make you familiar with the basic operation of this device. We do, however,
advice you to read the full manual to get the best performance from your THOMSON HD
receiver.
To turn your receiver ON or to Standby, use the
q
button on the remote control or the button
on the left side of the front panel.
Choose a channel with
pq
or the
P+/P-
buttons. Alternatively, you can digit the channel
number with the
0~9
buttons on the remote control or press
ok
in viewing mode to display the
channel list.
The volume can be adjusted with the
v+/v-
buttons. This is also possible in ALL menus which
present a TV picture in the background. In viewing mode you can also use the
tu
buttons.
Additionally you can
!
your receiver in ALL menus which present TV picture in the background.
The
Pg+/Pg-
enable you to scroll page wise in all list modes to make your channel or other
selection as comfortable as possible.
noTE:
5 minutes after switching the receiver to standby, it will enter the deep sleep mode. Within
this time the receiver is able to start up quickly. Starting up from deep sleep takes approx.
1 min. Deep sleep mode is to save power and let the receiver go down below 1 W power
consumption.
6.0oPERaTIon
In viewing mode, several features are available to make watching TV a true pleasure. This
chapter describes these features. Please also read chapter
7.0
to get familiar with the menu of
your new receiver.
6.1Changingchannels
Your new receiver is equipped with three ways to change channels.
1. Via direct access
2. Via the channel list and
3. Via the
P+/P-
or
pq
keys.
6.1.1Directaccess
To gain direct access to a certain channel, simply input its number with the
0~9
buttons on the
remote control. Channel numbers can be up to four digits long. Entering a number with less
than four digits is possible. After entering the channel number just wait a few seconds and your
receiver will switch to the selected channel.
6.1.2Channellist
Press
ok
in viewing mode to display the
Channel
List
. Use
pq
or
Pg+/Pg-
in the
Channel
List
to highlight your channel of choice and press
ok
to switch to the highlighted channel.
The
Channel
List
is equipped with a filter function to make it easier to find your favourite
channels. While in the
Channel
List
, press
RED
. An alphabet banner will now be displayed.
Use
pq
or
P+/P-
to select the first letter of the channel you wish to watch and press
ok
to
confirm. All channels beginning with the chosen letter will now be displayed.
The following buttons are available in the
Channel
list
and viewing mode:
Tv/R
:
Toggles between TV and radio channels, in channel list changes
the list mode.
lIsT
:
Opens the satellite list selection in viewing and list mode.
fav
:
Displays the favourite list selection in both modes.
