sPECIfICaTIons
P23
English
symptom
Cause
Remedy
The remote
control does not
work
The batteries of the remote
control are not inserted,
wrongly inserted or
exhausted.
Check whether the batteries are inserted
correctly or exhausted, if so replace the
batteries in the remote control.
The USB
storage device
is not working
properly.
Wrong formatted.
Bigger sized HDD
connected.
USB 1.1 device connected.
Format USB device by receiver in menu
Channel Manager – HDD Manager
.
Format USB device in your computer to
FAT/FAT32.
Bigger size HDD or HDDs with more
partitions might need longer time to be
detected.
The receiver might not properly work with
such an USB device
The external
USB HDD does
not start.
Power consumption is too
high.
Connect an extra power supply adapter
to your USB HDD device (max. supported
5V/1A).
The receiver
switches
to Standby
automatically.
Auto Standby function is
activated and reached the
adjusted time (default 3h).
In the menu
Timer – Time Adjust
you can
adjust the Auto Standby time or disable it.
Message E44-
32 No Event
Information.
Enter PIN code.
Receiver block channel as
there is no parental rate
information broadcasted.
See
7.1.4Parentallock
. Select
Not rated content
and set setting to
Unblocked
.
9.0sPECIfICaTIons
video
Profile level: MPEG-2, MPEG-4 H.264/AVC
Aspect ratio: 4:3 and 16:9, Pan & Scan, Letterbox, combined
Video resolution: 576p, 720p, 1080i
audio
Audio mode: Mono L/R, Stereo, Dolby Digital Plus
Tuner
LNB power: 13/18 V DC (+/- 1 V), max. 0.35 A, overload protected
DiSEqC version: 1.0, 1.2, GOTO-X
Connectors
SAT IN
SAT OUT
HDMI
TV SCART (RGB, CVBS, Audio L/R output with volume control)
Digital audio S/PDIF optical
USB 2.0 port, Type A: 5 V/1 A (max.) supported
IR – Infrared sensor input
DC main power
generalData
Supply voltage: 100 - 240 V AC 50/60 Hz,
