manualshive.com logo in svg

THOMSON Amethyst III, Руководство пользователя, Страница: 301 / 306

Поделиться
Скачать
THOMSON Amethyst III Скачать руководство пользователя страница 301

Glossary 

Amethyst III DTV Smart Switch 

301

User Manual

TCP

Transmission Control Protocol.
One of the main protocols in TCP/IP networks. TCP enables two hosts to 
establish a connection and exchange streams of data. TCP guarantees 
delivery of data and packets, and will be delivered in the same order in 
which they were sent. While IP takes care of handling the actual delivery 
of the data, TCP takes care of keeping track of the individual units of data 
(called packets) that a message is divided into for efficient routing through 
the Internet.

TCP / IP

Transmission Control Protocol/Internet Protocol
Two interrelated protocols that are part of the Internet protocol suite. TCP 
operates on the OSI transport layer and breaks data into packets. IP 
operates on the OSI network layer and routes the packets. While IP takes 
care of handling the actual delivery of the data, TCP takes care of keeping 
track of the individual units of data (called packets) that a message is 
divided into for efficient routing through the Internet. TCP/IP allows the 
construction of very large networks with little central management.

TDT

Time and Date Table.
A mandatory Digital Video Broadcast (DVB) SI table that supplies the 
Coordinated Universal Time (UTC) time and date.

TID

Table Identifier

TID Ext

Table Identifier Extension

TOT

Time Offset Table.
An optional (DVB) SI table that supplies the actual UTC-time including also 
time offset information coded as MJD.

TS

Transport Stream.
A multiplex of several Elementary Stream that are contained in packets.

TVCT

Terrestrial Virtual Channel Table (ATSC)

UDP

User Data Protocol.
A connectionless protocol, like TCP, that runs on top of IP networks. Unlike 
TCP/IP, UDP/IP provides very few error recovery services, offering instead 
a direct way to send and receive datagrams over an IP network without 
acknowledgements for guaranteed delivery.

Unicast

Unicast is communication between a single sender and a single receiver 
over a network.

UTC

Coordinated Universal Time.
UTC is the time standard by which the world regulates clocks and time. In 
casual use, UTC corresponds to Greenwich Mean Time (or GMT).

VANC

Vertical Ancillary.
Ancillary packets located in the vertical blanking interval of a digital video 
signal.

VBE

Variable Bits per Element. Refer to CBE entry.

VBI

Vertical Blanking Interval.
In analog video, the interval after the last displayed line of video in a field 
and before the first displayed line of video in the next field, during which 
a television receiver will synchronize vertically.

Содержание Amethyst III



















































































































































































































































































































Отзывы:

Нет отзывов