manualshive.com logo in svg

THOMSON Amethyst III, Руководство пользователя, Страница: 263 / 306

Поделиться
Скачать
THOMSON Amethyst III Скачать руководство пользователя страница 263

Appendix C ’Safety Instructions’ — Danger

Amethyst III DTV Smart Switch 

263

User Manual

Danger

The following warning statements identify conditions 
or practices that can result in personal injury or loss of 
life.

Mains Power Safety Instructions

RELIABLE EARTHING

 — The product is designed for connection to an 

earth-grounded AC outlet and must be correctly earthed through the 
main outlet of cable. To avoid risk of electrical shock or equipment 
damage, do not disconnect the grounding plug.

AC MAINS POWER CORD

 — AC mains cords are not shipped with 

equipment. You must use mains cords as described in 

Section ’Power 

Supply and Protective Ground’

 on page 45. The mains power cords 

should comply with the legislation in force in the country of installation.

MAINS POWER/CIRCUIT OVERLOADING

 — For each branch circuit, the 

connection panel should feature overload and earth fault protection and 
a bipolar cut-off device or a differential circuit breaker. 

MAINS POWER/CONNECTION PANEL 

— The connection panel should 

comply with the legislation in force in the country of installation. 
Connection panel position in the rack must ensure that plugs and power 
cords are within easy reach for switching off purposes.

OVERLOAD PROTECTION

 — Power supply unit has integrated overload 

protection which cannot be accessed or reset. In the event of a 
malfunction, please contact the Thomson Video Networks

 

Customer 

Services Department.

POWER DISCONNECTING

 — The equipment may or does feature more 

than one power supply cords. To reduce the risk of electric shock, 
disconnect all power supply cords before any intervention.

Rack Mount Safety Instructions

ELEVATED OPERATING AMBIENT

 — If installed in a closed or multi-unit 

rack assembly, the operating air ambient temperature of the rack 
environment may be greater than room ambient. Provide proper 
ventilation as described in 

Section ’Mounting in Rack’

 on page 42

 

to 

keep the equipment in an environment compatible with the maximum 
operating temperature specified by the manufacturer.

MECHANICAL LOADING

 — Mounting of the equipment in the rack 

should be such that a hazardous condition is not achieved due to uneven 
mechanical loading.

Содержание Amethyst III



















































































































































































































































































































Отзывы:

Нет отзывов