Thompson ViBE EM4000, Руководство пользователя

Страница: 85 / 350

Chapter 4 ’Web Browser Interface’ — Settings
ViBE EM4000 — Release 1.10 73
User Manual — 46073586AB02
Figure 4-23. Configuration menu,
This command is used to access the configuration page for Basic
encoder No. x.
Figure 4-24. Basic encoder configuration page
The Basic encoder can be set by clicking the following links
Configuration of Basic encoders must only be performed after
configuration of the Encoder’s operating mode
See
section ’Configuring the number of TSs at Encoder output’ on
page 63.
Table 4-6. Setting a Basic encoder
link Description
Service name Edit the service parameters
Components Edit the component parameters (Video,
audio or VBI)
add service Add a service to the Basic encoder
add component Add a component (video, audio or VBI)
to the service.
A service must contain a video
component.
[-] Delete a service or component.
A video component can not be deleted
if another component is in the service.
Expert parameters: xx Edit the Expert parameters of the Basic
encoder
Configuration menu