Thompson ViBE EM4000, Руководство пользователя

Страница: 86 / 350

Chapter 4 ’Web Browser Interface’ — Settings
74 ViBE EM4000 — Release 1.10
User Manual — 46073586AB02
Editing a service
Click Service name or add a service . If a service is already configured
add a service is not displayed.
Figure 4-25. Service Configuration - General page
This page is used to set general service parameters.
Name Used to indicate the name of the service displayed by
the Decoder.
Type Used to indicate service type ( TV, Mosaic, NVOD
reference, NVOD item or Other ). The standardized
numerical value corresponding to the service type is
displayed in the right-hand box. If the desired service
type is not available, select Other and enter the value in
the right-hand box.
Provider Used to indicate the name of the service provider
displayed by the Decoder.
Service Id Used to indicate the service identifier.
PID PMT Used to indicate the PID of TS packets in which the PMT
describing the service will be inserted. Services may
use PMT PIDs specific to each service or a PMT PID
common to all services.
PID PCR Used to indicate the PID of the component in which the
PCR is sent. The PCR is transported by the Video
component.
Running Status Used to select several broadcasting types: Not
Running , Starts in few seconds , Pausing or Running .
This parameter can be used to insert (or not insert) the
service and its components in the outgoing TS. It affects
the SDT field indicating service status.