Thompson ViBE EM4000, Руководство пользователя

Страница: 195 / 350

Appendix A ’Technical Specifications’ — Features
ViBE EM4000 — Release 1.10 183
User Manual — 46073586AB02
Control/Command
Control/Command via a Web Browser
The ViBE EM4000 Encoder can be operated using a Web Browser
connected to the device’s Web Interface application via the Ethernet
CTRL/CD link. This operating mode is used to access all Encoder features,
store and recall operating configurations and view device status and
alarms.
Control/Command via the XMS
The ViBE EM4000 Encoder features a built-in XMS Interface. In a system
with XMS 3500 software and an XMU, the XMS applications can be used
with a ViBE EM4000 MPEG HD Encoder for:
™ n+p redundancy management
™ Remote Flextream configuration
™ Alarm & Status monitoring
Control/Command via SNMP
The ViBE EM4000 Encoder features a MIB which can be used via the
Ethernet
CONTROL & COMMAND link and SNMP protocol.
„
SNMP V2.c
„ MIB II support
„
Trap management
„ Monitor alarms
„
Reboot unit
„ Recall Predefined Configurations
„ Display Remote Inventory Data
„ Display Last Events
NTP Time Synchronization
The ViBE EM4000 Encoder features an NTP client to synchronize the real
time clock of the product with external NTP servers. The Encoder can be
connected to two different NTP servers (for redundancy purposes).
Control/Command via the Encoder front panel
This Liquid Crystal Display and its associated keypad can be used to:
„ enter IP parameters (address, netmask and gateway)
„ display hardware & software release numbers