© Adolf Thies GmbH & Co. KG · Hauptstraße 76 · 37083 Göttingen · Germany
021821/08/21
Tel. +49 551 79001-0 · Fax +49 551 79001-65 · [email protected] ·
Page 70 of 102
7.2.26 Command RS
<id>RS<parameter><CR>
Reset
Access:
Reading / writing
Description:
With the command RS, the reset source is requested (reading
without parameter) or a reset carried out (writing with any
desired parameter).
The following reset sources can be output:
GENERAL RESET
BACKUP RESET
WATCHDOG RESET
SOFTWARE RESET
USER RESET
Parameter description:
1
Shut down Data logger
2
Shut down Data logger and carry out reset
Value range:
Initial value:
7.2.27 Command SV
<id>SV<CR>
SW version
Access:
Reading
Description:
With the command SV, the software version number can be
read.
Parameter description:
-
Response telegram:
-
Value range:
-
Initial value:
-
7.2.28 Command WLAN
<id>WLAN<parameter><CR>
WLAN Status
Access:
Reading / writing
Description:
With command „WL“ the status for WLAN is queried (read
without parameters) or switched between Ethernet and WLAN
(writing with parameter).
Parameter description:
0
Ethernet on / WLAN off
1
Ethernet on / WLAN on
Value range:
0 / 1
Initial value:
0
