© Adolf Thies GmbH & Co. KG · Hauptstraße 76 · 37083 Göttingen · Germany
021821/08/21
Tel. +49 551 79001-0 · Fax +49 551 79001-65 · [email protected] ·
Page 37 of 102
This could be the reasons for the failure of the login:
- Misspelled username (upper / lower case).
- Incorrectly entered password (note upper / lower case).
- Incorrectly IP-Adresse
- User or password has been changed or even deleted.
- If a ping test is negative too, check the connections.
After that, check the entries again and repeat the login again.
2. After a successful login the following window appears:
Figure 28: SFTP Home page for user
With a successful login, the
SFTP
access is successfully tested. In the second step,
the uploading and downloading of files must be tested. The picture above shows the
DLUuser
folder, which currently does not contain any data.
3. To close the connection, it is sufficient to close the
WinSCP
window. A new window
will open in which you will be asked whether you really want to end the session.
Confirm that with yes.
Note:
The SFTP users have no write or delete rights. You can only read files.