TC 816 Operation Manual
THERMON…The Heat Tracing Specialists
®
Page 14 of 42
Operation Manual 0503 E TC 816
After the data communication bus search is completed choices are offered to the user how to deal with the
result of the bus search, see figure 4.6.
TCD 01
Tracing Control Display
Figure 4.6
TCD 01 Tracing Control Display: Bus Configuration
•
RESCAN
:
In case not all expected controllers are show the missing controller can be
(re)connected to the bus system or faulty communication address settings corrected
and the bus can be re-scanned. Press the
or
buttons below
RESCAN
.
•
CONFIRM
:
Accept/confirm the bus configuration by pressing the
or
buttons below
CONFIRM
.
•
SKIP
:
In the event a controller is disconnected from the bus system, but the circuit
numbers in the TCD 01 Tracing Control Display have to remain as before the
controller was disconnected press the
or
buttons below
SKIP
to ignore the
displayed result of the bus scan and operate the TCD 01 with the original circuit
numbers.
After choosing
CONFIRM
or
SKIP
the TCD 01 automatically switches to heat tracing circuit display.
