TC 816 Operation Manual
THERMON…The Heat Tracing Specialists
®
Page 10 of 42
Operation Manual 0503 E TC 816
3.3
Configuration of the TCD 01 in General Settings (SETUP) Menu
By pressing the
and
buttons below
SETUP
simultaneously you can enter the General Settings
menu.
At any time in any display the General Settings Menu can be entered by pressing the same buttons simulta-
neously.
The General Settings menu can be left without saving changes by pressing the
and
buttons below
EXIT
simultaneously. If you want to save changes and leave this menu press the
button below
SAVE
or press the
button. Pressing the
button will additionally cause a restart of the TCD 01 and rescan of
the communication bus.
Figure 4.3
TCD 01 Tracing Control Display: General Settings Menu
By pressing the
or
buttons below
SELECTION
you can select the appropriate parameter to be
changed.
By pressing the
or
buttons below
SETPOINT
you can change the values of the parameters.
