Thermo Scientific Surveyor UV Plus, Руководство по оборудованию

Страница: 20 / 76

1
Introduction
LightPipe Flow Cell
4 Surveyor UV/Vis Plus Detector Hardware Manual Thermo Scientific
Sensitive optical fibers are exposed at both ends of the LightPipe flow cell (see Figure 4 ).
Thermo Fisher Scientific ships the LightPipe flow cell with end caps (see Figure 5 ) to protect
these optical fibers. Do not remove the protective end caps until you install the LightPipe flow
cell. If you remove the LightPipe flow cell from the detector, replace the protective end caps
for storage.
Figure 4. End of LightPipe flow cell, showing the sensitive optical fiber
Figure 5. LightPipe flow cell with protective end caps
CAUTION Avoid touching the ends of the LightPipe flow cell. Touching the ends of the
flow cell can damage the exposed optical fibers. If you must grasp the ends of the
LightPipe flow cell, wear clean, talc-free gloves.
Note Thermo Fisher Scientific ships two versions of the LightPipe flow cell. Figure 4
shows one version and Figure 21 and Figure 22 on page 29 show the other version.
Optical fiber
Tubing port
Protective end caps for storage