Thermo Scientific Russell RL060C, Руководство пользователя

Страница: 8 / 47

Thermo Scientific Russell RL060C Conductivity Meter User Guide
Chapter III
Preparation
Inserting & Removing Rubber Armor
(Armor on Cat. No. 5124002 only)
1 . . .To .remove .the .meter .from .rubber .armor, .push .the .
bottom .edges .of .the .meter .out .until .it .is .completely .
separated .from .the .armor . .Ensure .that .the .cables .of .
conductivity .electrode .or .temperature .probe .are .not .
connected .
2 . . .To .insert .meter .into .rubber .armor, .slide .in .from .
the .top .of .meter .before .pushing .the .bottom .edges .
down .and .set .it .into .position . .Lift .up .the .stand .at .
the .back .of .the .meter .for .bench .top .applications .if .
necessary .
Figure : RL060C Rubber Armor