Thermo Scientific Oretronic III, Руководство по эксплуатации и обслуживанию

Страница: 29 / 152

Thermo Fisher Scientific Installing the TMD 2-1
REC-4105 Rev L
Chapter 2 Installing the TMD
This chapter provides information about installing and setting up the
Oretronic III TMD. It discusses installation considerations, provides
procedures for mounting, and wiring, describes the hardware configura-
tion, and provides procedures for determining initial setup parameters
for the device.
The customer is responsible for initial inspection of the equipment and
for site preparation. It is essential that the equipment be placed on the
production line in accordance with the guidelines set forth in this
chapter.
The customer must ensure that qualified personnel are available to make
interconnections with other production equipment and perform work at
the installation site. A customer service representative is available to
assist with installation and verify operation as well as train personnel
assigned to operate and maintain the equipment.
Do not connect power to the machine or turn on the unit until you have
read and understood this entire chapter. The precautions and procedures
presented in this chapter must be followed carefully to prevent
equipment damage and protect the operator from possible injury.
Overview
Installation
Considerations
WARNING
Failure to follow safe installation and servicing
procedures could result in death or serious injury.
ƒ Make sure only qualified personnel perform
installation and maintenance procedures in
accordance with the instructions in this manual.
ƒ Allow only qualified electricians to open and work in
the electronics cabinets, power supply cabinets,
control cabinets, or switch boxes.