Thermo Scientific Oretronic III, Руководство по эксплуатации и обслуживанию

Страница: 18 / 152

Introduction
1-4 Introduction Thermo Fisher Scientific
REC-4105 Rev L
The Oretronic III TMD allows you to adjust both the sensitivity of the
device to output signals and the location of the measurement window
in the decay time. Signal strength is adjusted by a sensitivity factor;
the measurement-timing window is adjusted based on a material type
code factor. (See Figure 1-5).
Figure 1–5. Signal Sensitivity/Measurement Timing Adjustment
There are two models of the Oretronic III TMD: dual coil and under
belt single coil. The “standard” dual coil TMD has a transmitter coil
mounted above the belt and a receiver coil mounted under the belt.
The under belt single coil TMD is physically different but functionally
similar to a standard model. On an under belt single coil TMD, the
transmitter and receiver coils are together in a coil assembly mounted
under the belt.
This section describes the major components of a TMD system.
Figure 1-6 shows the components and system options for a dual coil
TMD. Figure 1-7 shows the components and system options for an
under belt single coil TMD.
System
Components