Thermo Scientific ModulyoD, Инструкция по эксплуатации

Страница: 11 / 30

2
1
3
4
5
11
The ModulyoD and vacuum pump, if connected to the auxiliary power outlet,
are protected by a circuit breaker built in to the mains power switch. You must
manually reset the switch whenever the circuit breaker is activated. (Please
refer to Section 2.3 for electrical requirements).
1.3 PROTECTION DEVICES
For freeze drying applications, the ModulyoD must be connected to a two-stage
vacuum pump and fitted with a drying accessory (see Section 6.0 for a list of
optional freeze drying accessories.) Optimal freeze drying conditions are nor-
mally determined empirically. For this reason, we recommend the user keep a
detailed log of operating parameters (see Appendix C, Freeze Drying User’s
Log). ModulyoD performance data may be collected by connecting a computer
to the RS232 port (See Figure 2). The following sections contain general infor-
mation on some of the factors that affect the freeze drying process.
1.4 APPLICATIONS
1.4.1 INTRODUCTION
1. Extension tube
2. Vacuum pumping pipeline
3. Accessory flange
4. Condenser chamber
5. Chamber drain outlet
Figure 8 — THE CONDENSER EXTENSION TUBE