Thermo Scientific Micro-Tech 9101, Справочное руководство

Страница: 72 / 329

Initializing the Micro-Tech
Initializing the Software
2-32 Micro-Tech 9101/9201 Reference Manual, Rev J Thermo Fisher Scientific
1. To enter the correct belt-scale code, press the Edit button and use the
keypad to enter the appropriate value.
2. Press the Enter button to return to the belt-scale-code entry screen.
Depending on which belt-scale code you selected, the Micro-Tech will
now display a list of the conveyor and scale parameters it needs to know
to work properly with your particular system. You should already have
entered the needed values in
Table 2–1 or Table 2–2 .
The basic idea here is to press the Details button, then repeatedly press
the down-arrow button, which allows you to scroll through a list of
parameters to make quite sure they are correct.
NOTE.
You must check the conveyor values suggested by the Micro-
Tech. If there is a mismatch between the suggested values and the actual
values for your particular conveyor system, you must enter the correct
values into the Micro-Tech. Incorrect parameters in these menus may
lead to inaccurate weight readings when the Micro-Tech is put into
operation.

To check the parameters, do the following.
1. The first thing to do is to locate the Micro-Tech’s System Data Sheet
(see Appendix A for an example of what this looks like) and grab
your filled-in copy of
Table 2–1 or Table 2–2 . Make sure you have
these in front of you, as you work through the following Micro-Tech
set-up menus.
2. Make sure the screen shown in Figure 2–11 above is currently being
displayed.
Entering the
Appropriate
Conveyor Data