Thermo Scientific Micro-Tech 9101, Справочное руководство

Страница: 6 / 329

seller unless they are manufactured pursuant to seller's design, but shall apply to the workmanship
incorporated in the installation of such items in the complete equipment. To the extent, purchased parts or
accessories are covered by the manufacturer's warranty; seller shall extend such warranty to buyer.
Seller's obligation under said warranty is conditioned upon the return of the defective equipment,
transportation charges prepaid, to the seller's factory in Minneapolis, Minnesota, and the submission of
reasonable proof to seller prior to return of the equipment that the defect is due to a matter embraced within
seller's warranty hereunder. Any such defect in material and workmanship shall be presented to seller as soon
as such alleged errors or defects are discovered by purchaser and seller is given opportunity to investigate and
correct alleged errors or defects and in all cases, buyer must have notified seller thereof within one (1) year
after delivery, or one (1) year after installation if the installation was accomplished by the seller.
Said warranty shall not apply if the equipment shall not have been operated and maintained in accordance
with seller's written instructions applicable to such equipment, or if such equipment shall have been repaired
or altered or modified without seller's approval; provided, however, that the foregoing limitation of warranty
insofar as it relates to repairs, alterations, or modifications, shall not be applicable to routine preventive and
corrective maintenance which normally occur in the operation of the equipment.
“EXCEPT FOR THOSE WARRANTIES SPECIFICALLY CONTAINED HEREIN, SELLER DISCLAIMS
ANY AND ALL WARRANTIES WITH RESPECT TO THE EQUIPMENT DELIVERED HEREUNDER,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE. THE
SOLE LIABILITY OF SELLER ARISING OUT OF THE WARRANTY CONTAINED HEREIN SHALL
BE EXCLUSIVELY LIMITED TO BREACH OF THOSE WARRANTIES. THE SOLE AND EXCLUSIVE
REMEDY FOR BREACH OF THE WARRANTIES SET OUT ABOVE SHALL BE LIMITED TO THE
REPAIR OR REPLACEMENT OF ANY DEFECTIVE ACCESSORY, PART OR MATERIAL WITH A
SIMILAR ITEM FREE FROM DEFECT, AND THE CORRECTION OF ANY DEFECT IN
WORKMANSHIP. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES.”
Purchaser agrees to underwrite the cost of any labor required for replacement; including time, travel, and
living expenses of a Thermo Fisher Scientific Field Service Engineer at the closest factory base.
Thermo Fisher Scientific
Bulk Weighing and Monitoring
501 90th Avenue NW
Minneapolis, MN 55433
Phone: (800) 445-3503
Fax: (763) 783-2525
Disclaimer
Though the information provided herein is believed to be accurate, be advised that the information contained
herein is not a guarantee for satisfactory results. Specifically, this information is neither a warranty nor
guarantee, expressed or implied, regarding performance, merchantability, fitness, or any other matter with
respect to the products, and recommendation for use of the product/process information in conflict with any
patent. Please note that Thermo Fisher Scientific reserves the right to change and/or improve the product
design and specifications without notice.