Thermo Scientific Heratherm OGS 100, Руководство по эксплуатации

Страница: 24 / 88

Installation
Installing the Anti-tilt Anchor
3-8 Heratherm Thermo Scientific
Additionally, the following caution notes must be heeded at all times:
Condensation forming while
operating stacked devices
If stacked devices are operated at an ambient temperature of more than
26 °C (79 °F), temperature control may be adversely affected on the top
device while the decontamination routine is running on the bottom
device. To prevent any impairment of temperature control, make sure that
the space between and around any two stacked devices is well-ventilated
for optimum heat removal.
Risk of overheating with stacked devices
To avoid the risk of electrical components and the outer enclosure overheating
or temperature control failing due to insufficient ventilation, do not exceed the
specified stacking height!
Risk of tipping and dropping of stacked devices
You should be aware at all times that stacked devices do not form a stable unit,
even when the stacking pads and frames are used correctly. The top device may
tip over and drop down when being transported in a stack. To avoid injury to
persons and damage to equipment, do not attempt to move stacked devices as
a unit! Separate and move each device one by one, then restack them.