Thermo Scientific AutoWAVE 1-0479-013, Руководство пользователя

Страница: 39 / 44

Document 1-0479-013 Rev B
33
15.0 ESTABLISHING DATA COMMUNICATION LINKS
AutoWAVE’s versatility allows data communication links to be established using a variety of
different configurations. This, in turn, makes it possible to extend the range of the AutoWAVE
and
get around obstacles.
Diagram (A) shows the most common and straightforward link, a master communicating to a slave
in a dedicated link.
Diagram (B) depicts how a link might be set up using a repeater. The repeater may be sitting on a
hilltop or other elevated structure to link the master to the slave. In this setup it may be desirable
to use an external omnidirectional antenna on the repeater; to extend the range, Yagi antennas could
be used on either or both of the master and slave.
When a repeater is used the RF speed is cut in half, making 115.2 Kbaud uncompressed throughput
unachievable. The baud rate, however, may still be set at 115200.