Thermo Scientific AutoWAVE 1-0479-013, Руководство пользователя

Страница: 26 / 44

Document 1-0479-013 Rev B
20
Standard Hop Table
Modem Serial Number 571-1001
(0) Set Operation Mode
(1) Set Baud Rate
(2) Edit Call Book
(3) Edit Radio Transmission Characteristics
(4) Show Radio Statistics
(5) Edit Multipoint Parameters
(6) TDMA Menu
Enter Choice
MODEM CALL BOOK
Entry to Call is 00
Entry Number Repeater 1 Repeater 2
(0) 570-0432
(1) 565-1258 564-1102
(2) 000-0000
(3) 000-0000
(4) 000-0000
(5) 000-0000
(6) 000-0000
(7) 000-0000
(8) 000-0000
(9) 000-0000
© Change Entry to Use (0-9) or A(All)
(Esc) Exit to Main Menu
Enter all zeros (000-0000) as your last number in list.
Figure 6: Call Book Menu
Entering or modifying ID numbers in the Call Book
Entering or modifying ID numbers in the Call Book is a straightforward process. When in
the Call Book menu enter the position number (0-9) you wish to edit. You
will be prompted
for the new number (formatting is automatic, you do not need to enter the dash). Once the
number is entered, (unless it is 000-0000), you will be asked for the number for the repeaters
to be used. If no repeaters are to be used then enter the escape key; your entry will be
complete and you will be back in the Call Book menu screen. If you enter a repeater number
you will then be prompted for the number of the second repeater to use. If a second repeater
is being used then enter the number at this time, if not then enter the escape key. Once again
the modem will retain your entries, as shown in the updated Call Book menu screen.