Thermo Scientific ARL EQUINOX 5000 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 58

background image

Chapter |

Introduction

Confidential, limited rights

PN AA83865 | Revision A | 25-Oct-2019

Instruction Notice, ARL EQUINOX 5000-5500

Page

5

2

Introduction

ARL EQUINOX 5000/5500 X-Ray diffractometer is designed for measuring of crystalline
samples (powder, bulk, metals, thin layers, etc...), phase identification, non -destructive quality
control, as well as for many other applications.

This instrument is intended for professionals. The user is advised to read the f ollowing
instructions and any other additional information supplied by Thermo Fisher Scientific before
operating the instrument.

Thermo Fisher Scientific declines all responsibilities for improper use by unauthorized
personnel or non-authorized operation of the instrument.

For any additional information, contact Thermo Fisher Scientific.

Supplied Items

Before the shipment, ARL EQUINOX 5000/5500 X-Ray diffractometer is tested and packed
carefully. However damage can occur during the transport.

If the instrument or any additional supplied item has been damaged during transport, or if you
notice any signs of a possible damage, please contact both the transport company
representative and the Thermo Fisher Scientific representative as soon as possible.

Furthermore, if you notice that any part is missing or you have any questions about
the delivered items, contact the Thermo Fisher Scientific representative.

Storage

The storage where the instrument is stored has to meet following ambient specifications:

Temperature: 0

– 50°C, relative humidity: < 95% (without condensation).

Assistance

The Thermo Fisher Scientific worldwide technical support network consists of highly trained
field service engineers, technical support specialists and service coordinators who are read y
to quickly assist the customers with answers and solutions to service needs and application
questions. If you need any help, please contact the local Thermo Fisher Scientific
representative.

Manufacturer

THERMO FISHER SCIENTIFIC INEL SAS
71 rue d’Orléans
45410 ARTENAY, FRANCE
Tel : +33(0)2-38-80-45-45

«
...
3
4
5
6
7
...
»

Содержание ARL EQUINOX 5000



























































Отзывы:

Нет отзывов

Похожие инструкции для ARL EQUINOX 5000

Бренд: Camozzi Страницы: 2

Бренд: Baker Hughes Страницы: 168

Бренд: RASHA PROFESSIONAL Страницы: 11

Бренд: MADRIX Страницы: 24

Бренд: MADRIX Страницы: 28

Бренд: Handler Страницы: 25

Growers Supply 109722

Бренд: FarmTek Страницы: 9

Бренд: Halyard Страницы: 88

Бренд: HALDER Страницы: 2

Бренд: IFM Страницы: 175

Бренд: IFM Страницы: 5

Бренд: Land Pride Страницы: 38

Бренд: Mackie Страницы: 34

Бренд: Mackworth Страницы: 38

Бренд: P&P Страницы: 6

Бренд: Harken Страницы: 4

Бренд: Daekyung Страницы: 15

TR 2B INC INT NC

Бренд: OMGA Страницы: 76

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды