Thermo Scientific A44769, Руководство пользователя

Страница: 97 / 132

Table 2 OPC-UA command list
(continued)
Variable Type Values/Description
SetProtocolState Enum
•
StopProtocol
– Stop the protocol.
•
SendProtocolToRotea
– Load the
protocol to the Rotea
™
instrument.
•
RunProtocol
– Start the protocol, same
as pressing the Start button on the
instrument.
•
PauseProtocol
– Pause the protocol
• RecoveryRunProtocolFromStep – Start
a protocol from the step specified in
SetRecoveryStepNumber .
• RecoveryRunProtocolFromStep – Start
a protocol from the step specified in
SetRecoveryStepNumber .
• RecoveryRunProtocolSingleStep – Start
a protocol and run a single step number
SetRecoveryStepNumber.
• SkipToNextStep - advances the protocol
to the next step by ending this step.
SetRecoveryStepNumber UInt32 The recovery step number to start from. Used
by
SetProtocolState .
SetSkipButtonEnable Enum Enable the advance button on the Rotea
™
instrument:
• Disabled
•
AsPerProtocol
• Enabled
Reports Rotea ™ application to OPC-UA
Table 3 Variable set when changed
Variable Type Value/Description
CentrifugeSpeed UInt32
The current centrifuge speed
InstrumentName String
The name of the instrument, stored on the
instrument, set by the GUI
MainFirmwareVersion String The main board firmware version on the
instrument
ModelNumber String The model number of the instrument, set
during manufacture
Chapter 4
OPC-UA interface
OPC-UA interface
4
CTS ™ Rotea ™ Counterflow Centrifugation System User Guide
97