thermital 20034707, Руководство по установке, эксплуатации, техническому обслуживанию и управлению системой

Страница: 35 / 40

Regular maintenance is a legal requirement. It is also
essential for the safety, efficiency and durability of the
boiler. Proper maintenance keeps consumption and
emissions down, and ensures that the boiler continues to
operate reliably over time.
Have your boiler serviced either by
THERMITAL
’s
Technical Assistance Service or by a qualified heating
engineer.
Analyse the combustion fumes before commencing any
maintenance. The results of fume analysis can give a
clear idea of what servicing or repairs are needed.
1
2
1
1
3
OPENING THE DOOR
System A - THE/TG 90÷349 3S:
- Make sure that the top safety bolts (2) and bottom safe-
ty bolts (3) on the hinged side of the boiler are tight.
- Completely unscrew the main fixing bolts (1) and open
the door. (These bolts are captive in the door and can-
not be removed.)
System B - THE/TG 448÷1450 3S:
- Completely unscrew the main fixing bolts (1) and open
the door. (These bolts are captive in the door and can-
not be removed.)
b
The first time you open the door, remove the
spare hinge assembly ‘B’ (bushing (10), bolt (9),
and washer (11)) opposite the hinged side of the
door.
ADJUSTING THE DOOR
Make quite sure that the door presses uniformly all around
the double seal to prevent dangerous fumes escaping
into the air from the pressurised furnace. Proceed as fol-
lows to adjust the door.
System A - THE/TG 90÷349 3S:
- Push the door shut and tighten the main fixing bolts (1)
until the seals start to compress.
- Loosen the safety bolts (2 and 3) then fully tighten the
main door fixing bolts (1).
- Re-tighten the safety bolts (2 and 3).
System B - THE/TG 448÷1450 3S:
- Push the door shut and tighten the main fixing bolts (1)
until the seals start to compress.
b
Make sure that the door is properly adjusted after
every maintenance operation.
- Turn the system’s main power switch OFF
- Close the fuel shut-off cocks.
b
Make sure that the door is properly adjusted after
every maintenance operation.
ON
OFF
2
3
4
5
9
11
10
B
1
1
1
1
1
1
35
ENGLISH
TECHNICAL ASSISTANCE SERVICE
MAINTENANCE