thermital 20034707, Руководство по установке, эксплуатации, техническому обслуживанию и управлению системой

Страница: 30 / 40

1
6
13
8
9
15
12
7
2
3
14
4
10
11
5
P
30
ENGLISH
INSTALLER
- Push out the pre-formed cutouts in the boiler’s side
panel ((4) or (5) depending on what side you want
to install the control panel) corresponding to the oval
cable grommets in the control panel.
- Perforate the membranes of the control panel cable
grommets. Route the electrical cables through them
and insert the sensors in their sockets.
- Fix the control panel (12) to the boiler casing using the
screws provided.
- Fit the side rails (1) and cross members (2).
- Engage the bottoms of the rear side panels (6 and 3),
central side panels (13 and 14), and front side panels
(4 and 5) in the bottom rails of the base, then hook
their top lips over the top rails (1) running between the
front and rear heads.
- Secure the side panels in place with the top cross
beams (7) and the screws provided.
- Fit your chosen control panel on the left panel (4) or
right panel (5) as instructed in the control panel’s own
instruction manual.
- Route the electrical cables and insert the sensors in
their sockets.
b
Use the copper socket (P) to insert the sensors
of the safety devices (see the “Location of sen-
sors” section).
- Fit the cable grommets provided into their seats in the
panels.
- Fit the rear top panel (15), the central top panels (8
and 9) and the front top panel (10) to close the top of
the boiler.
- Once all the panels are in place, fit the front cover (11)
over the top of the door.
Models THE/TG 850÷1450 3S