Have
THERMITAL
’s Technical Assistance Service start up your
THERMITAL THE/TG 3S
boiler for the first time. Once
this has been done, the boiler can be left to function automatically.
Under certain circumstances, such as after long periods of disuse, the service engineer responsible for the boiler may
need to re-start it without involving the Technical Assistance Service.
To do so, perform the following checks and operations:
- Check that the gas cock and heating water cock are
open.
- While the system is still cold, check that working pres-
sure in the water circuit is
over 1 bar
but below the
maximum limit specified for the boiler.
- If the system is equipped with a temperature controller or
timer thermostat, make sure that it is switched on.
- Adjust the timer thermostat/s or temperature controller to
the desired temperature (~20° C).
- Turn the system’s main power switch ON.
- Turn the control panel power switch ON and make sure
that the green power indicator lights.
- Make the settings as instructed in the instruction man-
ual for your control panel.
ON
OFF
14
ENGLISH
SYSTEM MANAGER
START UP
Содержание 20034707
Страница 1: ...THE TG INSTALLATION OPERATION MAINTENANCE AND SYSTEM MANAGEMENT MANUAL...
Страница 39: ...39 ENGLISH GENERAL 39...