Thermaltake TWV 500W, Руководство по эксплуатации

Страница: 36 / 79

36
12. Technical Data
• Operation at the mains voltage, 115V~/230V~, 50/60Hz (automatic change-over)
• Output voltages and output currents (also see imprint on the mains unit):
+3.3V= max. 30A
+5V= max. 30A
+12V1= max. 18A
+12V2= max. 18A
-12V= max. 0.5A
+5V= standby max. 2A
The mains unit is equipped with two separate 12V= circuit arms (12V1 and 12V2). Thus, mutual
interference due to high load currents is prevented.
• 3-pin connector for speed output (connect to the respective of the mainboard, for control of the
speed of the fan e.g. via BIOS)
• Connection for speed regulator
• Cable with small connector for connection to the LC display on the 5.25" plug-in unit (the display
indicates the power currently delivered by the mains unit)
• All power supply cables can be connected/disconnected as required
Voltage connections of the enclosed adapter cables (number of 5.25" and 3.5" power connectors
might change for later versions of the mains unit):
- 1 * 24-pin ATX connector (for mainboard), one 4-pin part of the connector can be detached
(for mainboards with 20-pin ATX power connection)
- 9 * 5.25" power connector
- 2 * 3.5" power connector
- 1 * 4-pin ATX2.0 12V connector (for mainboard with corresponding connection)
- 4 SATA power connector
• Mains switch on the rear of the device
• Active PFC (power factor correction)
â
The manufacturer reserves the right of modifying the product without prior notice.
Therefore, some topics of this operating manual might not apply to the present product.