THERALASE TLC-2000 Series, Руководство по эксплуатации

Страница: 24 / 38

TLC-
2000
THERAPEUTIC MEDICAL LASER
Document: 600-0013
2
2
4) SYSTEM OPERATION OVERVIEW
Steps for Advanced Treatment
To operate the Advanced TLC-2000, the basic steps are:
1.
From the Theralase™ TLC-2000 Clinic Desktop, tap the Advanced Treatment tab.
2.
Enter the patient’s name in the search field.
3.
If the patient is not in the database, tap the New Patient button and input patient data into the software database and
save. Otherwise, go to step 4.
4.
Select the patient’s name.
5.
Select the To Diagnoses button.
6.
Select the diagnosis that is to be treated.
7.
If no patient diagnosis is in the database, tap the New Diagnosis button and select the condition to be treated from the list
and save. Otherwise, go to step 8.
8.
Select the Start New Treatment button.
9.
Input the patient’s pain scale and press the Save button. The Treatment Control Panel will pop up.
10.
Place the probe on the patient treatment area.
To perform a treatment:
1.
Select
the Measurement Mode button for one of the available Laser Probes and press the Black Start pushbutton once on
the Laser Probe. This will determine an optimal protocol for the particular patient’s physical profile.
2.
Having already completed a measurement, select the Treatment Mode button for one of the available Laser Probes.
This communicates the time and power settings to the Laser Probe.
3.
Start the treatment either by pressing the Black Start pushbutton on the side of the Laser Probe or the Start button
directly on the software itself.
4.
The laser diodes will emit laser light and the time will start to decrement. The Laser Probe will provide visual and audible
indications during the time the lasers are emitting laser light. When the time counts down to zero the laser diodes will
turn off and the Laser Probe will generate a different audible BEEP sound.
5.
If treating another point, move the laser probe to the next treatment area and press the Black Start pushbutton on the
Laser Probe or the Start button on the software to continue the treatment.
6.
To pause the treatment, either press the Black Start pushbutton on the side of the Laser Probe or the Pause button on
the software. To resume treatment, press the Black Start pushbutton again or the Start button on the software.