THERALASE TLC-2000 Series, Руководство по эксплуатации

Страница: 14 / 38

TLC-
2000
THERAPEUTIC MEDICAL LASER
Document: 600-0013
1
2
Connecting/Disconnecting the Laser Probes (TLC-2001) to/from the Power Pack (TLC-2002)
All the Laser Probes feature a very simple medical grade push-pull cable connector. This consists of a cable with a connector
assembly on each end and a receptacle assembly in the Power Pack and the Laser Probe.
Assurance of proper mating is provided by keying. The key(s) of the cable plug assembly are designated by an arrow on the
plug and must align with the key of the receptacle assembly.
Figure 8. Probe Assembly illustrating the key. Note that the key is located at the 6 o’clock position.
The cable plug assembly must be properly aligned with the receptacle assembly, and then inserted until the latches engage
the receptacle assembly. If needed, rotate the connector until the key is aligned. There should be no need to force the
connector into the receptacle. To ensure proper mating, there must be an audible “click”.
Figure 9. Mating the Connectors – Cable Plug Assembly Key is aligned with Receptacle key.
The connectors must be unmated by first gently sliding the housing subassembly away from the receptacle assembly and
then pulling the entire connector out. PLEASE hold the main body and DO NOT pull the cable.
Figure 10. Un-mating the connected assembly.