RES-XR4-3U Installation Manual
Version 1.3
2-16
Themis Computer
2.1.5.2 Storage-Drive Removal
After opening the front doors, perform the following steps to remove and install a
storage drive:
1.
Make sure the necessary precautions have been observed as per the previous
Note.
2.
Locate the drive to be removed.
3.
Insert the barrel lock key into the storage drive lock you want to remove—see
A
,
on page 2-17—and turn it 45 degrees clockwise (presuming
the storage drive is locked).
4.
Firmly push in the latch lock until the latch handle releases from the drive.
5.
Grab the latch handle and pull the drive completely away from its slot.
Figure 2-13.
Unlocking the RES-XR4-3U Storage Drives (Front Doors Removed)
Drive Lock
(one per drive)
Drive Release
Button
Drive 1
Drive 2
Drive 3
Drive 4
Drive 5
Drive 6
Drive 7
Drive 0
Note:
Since RES-XR4-3U storage drives are “hot-swappable”, it is not necessary
to turn off system power in order to remove and replace a drive (except the oper-
ating system Drive 0). A warning should be broadcast to all users before removing
the drive. The drive being replaced should be dismounted before being removed.
Consult your operating system manual for specific details.
Caution:
When pulling the storage drive from the chassis, hold it at the bot-
tom to prevent it from falling and damaging the drive.
Содержание RES-XR4-3U
