Themis RES-XR4-3U, Руководство по установке

Страница: 113 / 184

3-25
Themis Computer
3—BIOS Setup Utility
Advanced Setup Configurations
Bits Per Second
This item sets the transmission speed for a serial port used in Console Redirection.
Make sure that the same speed is used in the host computer and the client computer.
A lower transmission speed may be required for long and busy lines. The options are
9600, 19200, 38400, 57600, and
115200 (bits per second).
Data Bits
Use this feature to set the data transmission size for Console Redirection. The
options are 7 and
8 (Bits).
Parity
A parity bit can be sent along with regular data bits to detect data transmission
errors. Select Even if the parity bit is set to 0, and the number of 1's in data bits is
even. Select Odd if the parity bit is set to 0, and the number of 1's in data bits is odd.
Select None if you do not want to send a parity bit with your data bits in transmis-
sion. Select Mark to add mark as a parity bit to be sent along with the data bits.
Select Space to add a Space as a parity bit to be sent with your data bits. The options
are
None , Even, Odd, Mark , and Space.
Stop Bits
A stop bit indicates the end of a serial data packet. Select 1 Stop Bit for standard
serial data communication. Select 2 Stop Bits if slower devices are used. The options
are
1 and 2.
Flow Control
This feature allows the user to set the fl ow control for Console Redirection to pre-
vent data loss caused by buffer overflow. Send a “Stop” signal to stop sending data
when the receiving buffer is full. Send a “Start” signal to start sending data when the
receiving buffer is empty. The options are
None and Hardware RTS/CTS.
VT-UTF8 Combo Key Support
Select Enabled to enable VT-UTF8 Combination Key support for ANSI/VT100 ter-
minals. The options are
Enabled and Disabled.
Recorder Mode
Select Enabled to capture the data displayed on a terminal and send it as text mes-
sages to a remote server. The options are
Disabled and Enabled.
Resolution 100x31