3-20
Themis Computer
RES-XR4-3U Installation Manual
Version 1.3
The following items are displayed when RAID Mode is selected:
Port 0~5 Hot Plug
Select Enabled to enable hot-plug support for a port specified by the user. The
options are
Enabled
and Disabled.
3.3.6
SCU Configuration
3.3.6.1 Storage Controller Unit
Select Enabled to enable support for PCH SCU devices. The options are Disabled
and Enabled.
3.3.6.2 OnChip SAS Oprom
Select Enabled to support the onboard SAS Option ROM to boot up the system via a
storage device if a SAS device is installed. The options are Disabled and Enabled.
3.3.6.3 SCU Port 0~3
The SCU devices detected by the BIOS will be displayed.
3.3.7
PCIe/PCI/PnP Configuration
This submenu allows the user to configure the following PCIe/PCI/PnP settings.
3.3.7.1 PCI ROM Priority
Use this feature to select the Option ROM to boot up the system when there are mul-
tiple Option ROMs available in the system. The options are Legacy ROM and EFI
Compatible ROM.
3.3.7.2 PCI Latency Timer
Use this feature to set the latency timer of each PCI device installed on a PCI bus.
Select 64 to set the PCI latency to 64 PCI clock cycles. The options are 32, 64, 96,
Note:
iF models only support SATA drives.
Содержание RES-XR4-3U
