Themis RES - 32XR3, Руководство по установке

Страница: 65 / 142

2-19
Themis Computer
Installation and Operation
Operation
2. On the front of the RES-21XR3, push the system power on/off button (see
Figure 2-15 ). This will cause the system
POWER
LED to light (green).
2.3.3 Getting Started
2.3.3.1 Configuration
1. Make sure all disk drives are installed (see “SAS/SATA Storage Drive”, page
2-10). Drive ID numbers are shown in
Figure 2-9 , page 2-11. Changes may
be made through the BIOS.
2. If an optional graphics card is installed, connect a multiscan monitor to the
graphics connector.
3. Attach a PS/2 keyboard and mouse to the appropriate connectors on the rear
I/O panel of the RES-21XR3 (see
Figure 1-5 on page 1-7).
4. Turn the system on (see previous section).
2.3.3.2 Linux Installation
The subject of installing the Linux operating system onto the RES-21XR3 is detailed
in Appendix C, “Red Hat Enterprise Linux 5 Installation”.
Figure 2-15. System Power Button and LED on the RES-21XR3 Front
System Power
On/Off Button
Power LED