Themis RES - 32XR3, Руководство по установке

Страница: 56 / 142

RES-21XR3 for X8SAX Installation Manual
2-10
Themis Computer
2. Locate the lithium battery socket (see Figure 1-4 on page 1-6) and squeeze the
latch (see A , Figure 2-7 ) together until the battery lifts out of its socket.
3. Remove the old battery and replace with a new battery (see next section).
2.1.4.2 Installing a Lithium Battery
Perform the following steps to insert a new lithium battery:
1. Tilt the replacement battery into the empty socket so that it is angled under the
battery latch (see
B , Figure 2-7 ).
2. Carefully press down on the battery until it clicks firmly into place.
2.1.5 SAS/SATA Storage Drive
Perform the following to remove and install a hard-disk/solid-state drive. The front
doors of the RES-21XR3 must be unlocked and opened to access the drives (see
Fig-
Figure 2-7. The RES-21XR3 for X8SAX Lithium Battery and Socket
To release, squeeze battery latch together...
Battery
A B
Latch
... and remove battery from socket
Note: The battery location is dependent on which motherboard is in-
stalled in the chassis.