Blinds and switch actuator RMG 8, blinds actuator JMG 4
and switch actuator module RME 8 - EIB
theben
As of: Apr-06 (Subject to change without notice)
Page 14 of 36
•
Objects 40, 41, 42
Name
(refer to the overview)
Function
Central priority 1, 2
and 3
Security objects
:
A security object enables an aimed reaction of the drives to a specific
situation with a high priority (refer to the appendix Priority Order of the
Drive Controller).
Example:
A safety object is connected to a wind sensor.
A drive connected to a textile sunshade is parameterised to react to this
security object.
For as long as a "0" is being sent, the standard operating status is assumed.
In the case of a storm, the wind sensor sends a "1" to the security object and
the sunshade is immediately retracted to the parameterised safety position.
IMPORTANT:
A security object may be controlled by one device only. Otherwise different
commands may cancel each other.
Annotation:
Reading the security objects i.e. with “read value” function of ETS software:
If the security status was initiated by cyclical monitoring, the value of this
object will remain 0
•
Object 43
Name
(refer to the overview)
Function
Drives central
Using this object, all the drive mechanisms parameterised accordingly can be
controlled from one central point.
With this function, all the roller shutters of a building front, for example, can
be raised or lowered simultaneously by pressing one button.
0 = raise
1 = lower
